Beyond High Availability: Disaster Recovery Architectures That Keep Running When HA Fails

Written by ybommishetti | Published 2025/06/05
Tech Story Tags: disaster-recovery | rto | rpo | cloud-architecture | system-design | failover-management | high-availability | site-reliability-engineering

TLDRHigh Availability (HA) is not enough. True Disaster Recovery (DR) requires isolated, tested, and automated failover strategies. This expert-driven guide explores DR architectures that actually work—covering RTO/RPO planning, real-world failures, multi-region setups, and practical cloud patterns to ensure business continuity beyond just uptime.via the TL;DR App

Introduction

Highly available systems fail catastrophically even though they promise 99.99% uptime. HA architectures could experience failures because of regional cloud outages and ransomware attacks and human errors. Organizations need to establish disaster recovery as a separate rigorous discipline to achieve true system resilience beyond high availability.

The complete strategy for restoring operations after catastrophic failures defines Disaster Recovery (DR). The range of failures extends past hardware malfunctions because it encompasses software bugs and malicious attacks and data corruption and complete cloud region failures. HA mainly focuses on preventing failure, where DR assumes failure is inevitable and prepares the organization to recover quickly and effectively.

The article provides a clear explanation of Disaster Recovery through practical examples and architectural patterns together with specific guidance for software engineers and site reliability engineers and infrastructure architects.


HA vs DR: The Critical Distinction

High Availability (HA) and Disaster Recovery (DR) operate as separate components which work together to enhance system resilience. Here’s how they differ:

Attribute

High Availability

Disaster Recovery

Scope

Localized Failures

Regional/Catastrophic Failures

Examples

Node crashes, AZ outages

Data deletion, region loss, ransomware

Objective

Maintain uptime

Restore services and data post-disaster

Tools

Clusters, Load Balancers, Auto-scaling

Backups, Replication, Multi-site deployments

Focus

Prevention

Restoration

Example: A Kubernetes cluster using pod anti-affinity and multi-AZ deployment ensures high availability within a single region. If one Availability Zone (AZ) fails, pods are rescheduled to healthy zones, keeping the app running.

However, this setup won’t help during a region-wide outage, cloud misconfiguration, or accidental deletion of resources, all of which can bring the entire system down.

That’s why Disaster Recovery (DR) plan with backups, replication to another region, and failover automation will help to recover applications and data in case of major failures.

High Availability keeps things stable in small failures. DR is the safety net for large-scale disasters.


Real-World Incidents: Why DR Is Critical, Not Optional

People generally consider Disaster Recovery as an insurance policy because it serves as protection against unexpected events yet remains unused until disaster strikes. But history tells us otherwise, the system failures spread rapidly throughout large networks. The following major incidents demonstrate how systems become vulnerable without a proper DR strategy.

  • GitLab (2017): Accidental Deletion and Faulty Backups

    A GitLab engineer who tried to resolve database lag problems ended up deleting the entire production PostgreSQL database. The hot standby database which served as a backup system immediately replicated the deletion operation. The team faced a severe service outage and data loss because their most recent backup was six hours old and their recovery process was untested and unreliable.

    Lesson: Real DR needs tested recovery procedures together with isolated backups and automated fallback mechanisms instead of redundant systems that replicate mistakes.

  • Code Spaces (2014): Cloud Account Hijack and Total Wipeout

    An attacker gained access to Code Spaces AWS control panel and proceeded to delete everything, EC2 instances, S3 buckets, backups, and even the DR configurations. Without offline or off-cloud backups, the company was unable to recover and had to shut down permanently.

    Lesson: Never put all your eggs in one basket especially not in one cloud account. DR must be offsite, offline, and immune to account level breaches.

  • Maersk (2017): NotPetya Malware Attack

    The global shipping giant was crippled by NotPetya, a malware that encrypted all Windows-based systems. Maersks entire global IT infrastructure went offline from terminals to email systems. Miraculously, one domain controller in Ghana survived because it was offline during the attack due to a local power outage. Using that, Maersk was able to recover, but it took over 10 days and $300 million in damages.

    Lesson: Sometimes offline backups are the only survivors. A resilient DR plan includes geographically isolated systems and malware resistant recovery points.

  • Facebook (2021): BGP Misconfiguration Takes Down Entire Network

    A faulty BGP (Border Gateway Protocol) configuration update knocked Facebook and all its services (Instagram, WhatsApp, Messenger) offline globally for hours. Internal tools were also inaccessible because they were hosted on the same network, locking engineers out from fixing the problem quickly.

    Lesson: DR isn’t just about data, it’s also about accessibility and operational recovery. Keep recovery tools in isolated environments that can function when the primary environment fails.

Key Takeaways:

  • The implementation of backups as DR requires automated processes which must be located offsite and tested at regular intervals.
  • DR infrastructure requires separation logical, geographical and sometimes provider-based.
  • The ability to recover from failures stands above the need for redundant systems.
  • Businesses should prepare for actual threats which include human mistakes and security breaches and natural disasters.

A properly developed DR plan converts major disasters into manageable disruptions. The absence of a recovery plan makes business recovery dangerous because some organizations never get to try again.


Key Metrics in Disaster Recovery: RTO and RPO

The process of designing a disaster recovery (DR) plan requires more than system restoration because it needs to achieve both timely recovery and minimal data loss. Two critical metrics guide this:

  • Recovery Time Objective (RTO)

    The maximum allowable time your system or service can be down after a failure before it must be restored.

    • Think of it as your downtime tolerance.

    • It defines how quickly services must be restored to avoid serious business impact.

  • Recovery Point Objective (RPO)

    The maximum acceptable amount of data loss, measured in time, from the moment of failure.

    • It answers the question: How much data can we afford to lose?
    • It reflects how frequently you need to back up data.

Example:

Let’s say an outage happens at 12:00 PM.

  • Your RTO is 1 hour
    • You must fully recover and have services running again by 1:00 PM.
  • Your RPO is 15 minutes
    • You must recover data as it existed by 11:45 AM.

That means any transactions or updates made between 11:45 AM and 12:00 PM may be lost and your systems should be designed to handle that loss.

Key Takeaways:

  • RTO = How fast you recover.
  • RPO = How much data you can afford to lose.
  • Stricter RTO and RPO means higher cost and complexity.
  • Your business SLAs (Service Level Agreements) should drive RTO/RPO targets not the other way around.
  • RTO and RPO influence your technology choices, backup frequency, network design, and failover approach.


Disaster Recovery Architectures

Each DR model represents a different trade-off between cost, complexity, RTO, and RPO. Let’s examine them

Backup and Restore (Cold DR) Architecture

Overview: Simple backups stored in object storage (e.g., Amazon S3, Azure Blob, Google Cloud Storage).

Architecture:

Use Case: Non-critical systems, dev/test environments.

  • Pros: Low cost, minimal operational overhead.

  • Cons: Recovery is slow; backups must be regularly tested.

Pilot Light Architecture

Overview: Maintain minimal resources (example: replicated DB, basic network setup) in DR region. Provision app servers only during failover.

Architecture:

Use Case: Moderately critical workloads.

  • Pros: Cost-effective with moderate recovery times.

  • Cons: Requires automated provisioning scripts, failover orchestration.

Warm Standby Architecture

Overview: All DR infrastructure is provisioned and partially scaled. DR Services run with reduced load and periodically verified.

Architecture:

Use Case: Applications with high SLAs and moderate budget.

  • Pros: Fast recovery, can validate live readiness

  • Cons: Ongoing cost for underutilized compute, config drift risks

Hot Standby (Active-Passive) Architecture

Overview: Two identical environments, one active and one idle. Traffic is routed to active, and failover is manual or automatic.

Architecture:

Use Case: Healthcare, banking, regulated industries.

  • Pros: Nearly seamless failover, no data loss.

  • Cons: High infrastructure costs for unused capacity.

Active-Active (Multi-Site) Architecture

Overview: Two or more regions handle live traffic. Each region has fully operational services.

Architecture:

Use Case: Global SaaS platforms, e-commerce, 24/7 services.

  • Pros: Continuous availability, seamless user experience.

  • Cons: High complexity, data consistency issues, expensive.


Best Practices for Disaster Recovery

  • DR should operate in separate cloud accounts or projects to stop the spread of accidental deletions.
  • The implementation of object locking and versioning enables immutable backups to protect against tampering.
  • The first step should be automation because tools like Terraform, Ansible and Pulumi enable the deployment of complete DR environments within minutes.
  • The organization should maintain precise and current documentation for runbooks and DR procedures and contact lists.
  • The practice of simulating failure scenarios through Chaos Testing should be performed on a regular basis. Learn and improve.
  • Use config scanners or CI/CD pipelines to ensure parity between prod and DR.
  • Ensure traceability, billing insights, and resource cleanup to tag and audit everything.


Conclusion

Organizations need to look at disaster recovery to function as a core competency beyond basic backup operations As infrastructure becomes more distributed and threats increase, having a mature DR posture is non-negotiable. High availability deals with expected situations but disaster recovery enables organizations to face unexpected disasters.

Start small. Pick a DR model that fits your business and expand over time. The cost of prevention is always lower than the cost of failure.


Written by ybommishetti | I’m Yakaiah Bommishetti, a Software Engineering Manager with over a decade of experience in building enterprise-grade telecom and network monitoring solutions.
Published by HackerNoon on 2025/06/05